Commercial Duty Electric Stationary Air compressors for the pro-consumer or heavy home hobbyist. Designed to power smaller air tools, low volume nail guns, small grinders and cut off tools.
Commercial Duty Electric Portable Typically found on the farm, ranch or construction job site. Great performance in a compact system with all the power you need to complete location work.
- Stationary
- CI51E61V 12 cfm
- CI51E62V 17 cfm
- CI51E63V 16 cfm
- Portable
- 2 HP 8 cfm
- 3 HP 12 cfm
- 5 HP 18 cfm
- Owners Manual
- Commercial-Duty Compressors
- Install Guide
- Electric Reciprocating Install Guide
Industrial Duty Electric Motor Compressors are designed to be used every day in automotive maintenance facilities, production facilities, fabrication facilities any many more.
Cube Industrial Electric Compressors feature a modular design for greater flexibility in expansion, replacement or upgrades. Ideal for applications with space parameters or existing air storage.
- 5-10 HP
- 5 HP
- 7.5 HP
- 7.5 HP Heavy-Duty
- 10 HP
- 15-30 HP
- 15 HP 45 cfm
- 15 HP 51 cfm
- 20 HP
- 25 HP
- 30 HP
- Cube Air System
- 5 HP
- 7.5 HP 24 cfm
- 7.5 HP 28 cfm
- 10 HP
- 15 HP
High value compressors for light commercial applications, contractors, and pro-consumers. These units are designed for job site applications that require high CFM at no more than a 50% duty cycle.
- Engine Driven
- 5.5 HP Honda Portable
- 5.5 HP Kohler Portable
- 8.5 HP Portable
- Owners Manual
- Commercial-Duty Compressors
Industrial Duty Gas/Diesel Engine Driven air compressors are designed to run 1-inch impact wrenches along with any assortment of smaller air tools. Air compressors for when you need to get the job done.
Industrial Duty Hydraulic motor driven air compressors driven by hydraulic drive motors that will run a wide assortment of impact wrenches along with any assortment of smaller air tools.
Cube Industrial Gas Engine Driven Designed to fit into tight spaces in service vans, enclosed trucks or smaller service bodies. Compact units with the power to run multiple sizes of air tools.
- Cube
- 5.5 HP 12 cfm
- 13-14 HP 23 cfm
- Enclosed Hydraulic
- 17 cfm
- 24 cfm
- 45 cfm
- Owners Manual
- 8-15 HP Engine Driven
- 15-20 HP Engine Driven
- Hydraulic Driven
- Install Guide
- Open Frame Gas/Diesel Reciprocating Compressors
Compressor Combination Packages Industrial Duty air compressors for maintenance trucks, service fleets or technicians that need to save space and weight. With power to run 1-inch impact wrenches combined with generators, welders or jump starters in the field or on the job site, this is what you need when you need to get the job done.
- Compressor Generator
- 16 cfm Diesel
- 16.5 cfm Gas
- 19 cfm Gas
- 23 cfm Gas or Diesel
- Gen-Welder
- 16 cfm Diesel
- 16 cfm Gas or Diesel
- 19 cfm Gas
- Jumpstarter Combos
- Gen-Jump-starter
- Gen-Weld-Jump-starter
- Owners Manual
- Reciprocating Combos
- Install Guide
- Reciprocating Engine Driven Compressor Packages
Industrial Duty Oil Free Air compressor for the medical, agricultural, food, beverage and laboratory environments. These units ensure your process or tools have oil-free air.
Industrial Duty Pressure Lubricated Air compressors that have internal oil pumps to make sure they stay lubricated even in the harshest environments.
Knowing how much air you need is important. A compressor that is too small can be over-worked. One that is too large can be inefficient. This tool uses the amount of tools, users, or cfm you normally use to calculate the size and cfm of the most efficient compressor for your application.
Not sure if you need a reciprocating or a rotary screw compressor? Here is some info to help you decide what will work for your application.
Open Frame Industrial Rotary Screw compressors are built with service and the ease of use in mind. Package for the owner that just wants a compressor they can turn on and run. Units from 10-500 cfm.
Cube Air System Rotary Screws provide the same efficiencies and reliability as open screw compressors for those with space parameters or existing air storage.
- 25-100 HP
- 25 HP
- 25 HP 80 dBA
- 30 HP
- 40 HP
- 50 HP
- 60 HP
- 75 HP 325 cfm
- 75 HP 335 cfm
- 100 HP
- 125 HP
- Cube Air System
- 5 HP
- 7.5 HP
- 10 HP
- 15 HP
- 15 HP Heavy Duty
- Install Guide
- Open Rotary Screw Install Guide
Open Frame Duplex Rotary Screw Compressors are the ultimate in electrical efficiency. Our duplex rotary screw compressors are built to be easy to service, maintain and operate. Available in a variety of horsepower, tank, and electrical voltage from 10-500 cfm.
- Install Guide
- Open Rotary Screw Install Guide
Enclosed Industrial Rotary Screw compressors are built into a sound attenuating enclosure to offer some of the lowest DBA levels in the industry. Units from 10-100 cfm.
- 5-20 HP
- 5 HP
- 7.5 HP
- 10 HP
- 15 HP 57 cfm
- 15 HP 68 cfm
- 20 HP
- Install Guide
- Enclosed Screw Install Guide
Gas & Diesel engine-driven Industrial Rotary Screw compressors can run multiple applications and tools depending on the jobs site and requirements. Units from 28-250 cfm.
Cube Air System Rotary Screws provide the same efficiencies and reliability as open screw compressors for those with space parameters or existing air storage.
Enclosed Hydraulic Driven Rotary Screw compressors operate on fluid power to run multiple applications and pneumatic tools.
- Owners Manuals
- Rotary Screw Gas/Diesel
- Rotary Screw Hydraulic
- Install Guide
- Engine Driven Rotary Screw
Rotary Screw Compressor/Generator Combos provide power and airflow for a variety of air tools and power tools, electrical lights and more.
- 75-110 cfm | 20-40 kW
- 75 cfm | 20 kW Diesel
- 75 cfm | 40 kW Diesel
- 110 cfm | 30 kW Diesel
- Owners Manual
- 5-34 HP Rotary Screw Combos
- 35-105 HP Rotary Screw Combos
- Install Guide
- Rotary Screw Engine Driven Compressors
Knowing how much air you need is important. A compressor that is too small can be over-worked. One that is too large can be inefficient. This tool uses the amount of tools, users, or cfm you normally use to calculate the size and cfm of the most efficient compressor for your application.
Not sure if you need a reciprocating or a rotary screw compressor? Here is some info to help you decide what will work for your application.
- Commercial-Duty
- Commercial-Duty Compressors
- Reciprocating Engine and Hydraulic Driven
- 8-15 HP Engine Driven
- 15-20 HP Engine Driven
- Hydraulic Driven
- Reciprocating Packages
- Reciprocating Combos
- Rotary Screw Engine and Hydraulic Driven
- Rotary Screw Gas/Diesel
- Rotary Screw Hydraulic
- Rotary Screw Packages
- 5-34 HP Rotary Screw Combos
- 35-105 HP Rotary Screw Combos
- Electric Reciprocating
- Installation Guide
- Cube Air System
- Installation Guide
- Engine and Hydraulic Driven
- Installation Guide
- Install and Setup
- Install Checklist
- Quickstart Checklist
- Open Frame Rotary Screw
- Installation Guide
- Engine and Hydraulic Rotary Screw
- Installation Guide
- Oil-Free Compressors
- Installation Guide
- cfm Calculator
- Download pdf
- Voltage Drop Calculator
- Download pdf
- Electrical Guide
- NEC Wiring Codes
- Wiring Guides
- How to Wire Compressors for Installation
Reciprocating CompressorsCombination Packages
16 cfm Diesel Engine Compressor/Generator
IG Industrial-duty gas and diesel compressors are designed for applications that require air on the go. Built for durability and reliability with features designed to make these compressors simpler to use and easier to maintain than any other compressor in this class. The engine is standard on the drivers side of the vehicle. The unloader is at your finger tips so you can unload the compressor before starting to increase solenoid and starter life. The transfer tube is protected by the receiver for saftey.
With the capacity to run 1-inch impact wrenches along with any assortment of air tools, this is the compressor you need to get the job done.
- Features
- 16 cfm @ 175 psi
- 5000 Watt Generator
- No Start-Up Kit Required
- Optional 5-Year Pump Warranty
- Access to compressor valves without compressor head removal
- Alternator on drive engine
- ASME tested powder coated steel tank
- Bearings on both ends of the crank shaft
- Centrifugal unloader
- Critical controls protected by compressor base plate
- Disk and spring valves
- Drive engine on left side for safety
- Fully enclosed belt guard
- Full saddle mounting feet instead of pegged mounting feet
- Heavy-duty air filter
- Heavy-duty two-stage solid cast iron pump
- Industrial-duty engine
- Needle bearings, and inserts on rods
- Pilot valve continuous operation
- Swedish steel valves
- Torrington needle bearings
- 2-grove B width drive pulley
- Platinum Model Features
- Automatic tank drain
- Belt guard aftercooler
- On-board battery mounted and wired (No truck wiring needed)
- Tank discharge ball valve
- Vibration pads
- Freight pre-paid in the 48 states & southern Canada
- Downloads
- Product Sheet
- Reciprocating Combos
- Reciprocating Packages Catalog
- Installation Guide
- Install Checklist
- Warranty
- Warranty Claim Form
Air-cooled aftercooler on all Platinum units
| Model | HP | Mount | Tank | Drive Engine | Length | Width | Height | Weight |
|---|---|---|---|---|---|---|---|---|
| CI10DEK30-GEN | 10 | Tank amount | 30 Gallon Horizontal | Kohler Diesel | 46 | 26 | 44 | 575 |
| Add -P after model number to make Platinum model | ||||||||
Reciprocating Models
Rotary Screw Models
Air Treatment Products
Product Library
Technical Library